Product description
<
Product description
JELLY SPRAYER ECONOMY
The implement Jelly economy:
- with diaphragm compressor.
- with a special flow-heater.
- with energy saving technique -due to a good heat
- insulation the heat is retained for hours in case of
- work interruptions.
- with heated agent-hose up to the spray gun.
- with spray gun with heat reflecting casing.
- with analog controlled heat adjustment.
- with pneumatically driven, diaphragm controlled
- agent-feed-pump.
- with maintenance-free technique.
- in stainless special steel execution.
- in HACCP-conformity execution.
- energy saving.
Technical data
- Power Supply: 230 V
- Frequency: 50 Hz
- Fuse in the feed line: 16 A
- Length of power supply cable: 3 m
- Heating capacity: 1,650 watt
- Length of the agent-hose: 1.2 m
- Measurements:
- Length:315 mm
- Width:450 mm
- Height:350 mm
- Weight: 26 kg
- Spraying pressure: set to 2,8 bar and cannot be changed
- Processing temperature: set to 87°C and cannot be changed
- Temperature + 2 to + 50°C + 2 to + 50°C
- Humidity maximum 90% maximum 90%
JELLY SPRAYER CONCEPT
The implement Jelly concept:
- with diaphragm compressor.
- with a special flow-heater.
- with energy saving technique -due to a good heat
- insulation the heat is retained for hours in case of
- work interruptions.
- with heated agent-hose up to the spray gun.
- with spray gun with heat reflecting casing.
- with temperature control controlled heat
- adjustment.
- with pneumatically driven, diaphragm controlled
- Agent-feed-pump.
- with maintenance-free technique.
- in stainless special steel execution.
- in HACCP-conformity execution.
- energy saving.
Technical data
- Power Supply: 230 V
- Frequency: 50 Hz
- Fuse in the feed line: 16 A
- Length of power supply cable: 4 m
- Heating capacity: 3500 watt
- Length of the agent-hose: 1.5 m
- Measurements:
- Length:460 mm
- Width:495 mm
- Height:335 mm
- Weight: 40 kg
- Spraying pressure: set to 2,8 bar and cannot be changed
- Processing temperature: setting between 25 and 93°C
- Temperature + 2 to + 50°C + 2 to + 50°C
- Humidity maximum 90% maximum 90%
CYPER COMPACT
The implement Jelly compact:
- with diaphragm compressor.
- with a special flow-heater.
- with energy saving technique -due to a good heat
- insulation the heat is retained for hours in case of
- work interruptions.
- with heated agent-hose up to the spray gun.
- with spray gun with heat reflecting casing.
- with analog controlled heat adjustment.
- with pneumatically driven, diaphragm controlled
- agent-feed-pump.
- with low-maintenance technique.
- with transport rollers.
- in stainless special steel execution.
- in HACCP-conformity execution.
-
energy saving.
Technical data
- Power Supply: 230 V
- Frequency: 50 Hz
- Fuse in the feed line: 16 A
- Length of power supply cable: 3 m
- Heating capacity: 3500 watt
- Length of the agent-hose: 4 m
- Measurements:
- Length:810 mm
- Width:580 mm
- Height:1225 mm
- Weight: 125 kg
- Spraying pressure: set to maximum 2,8 bar at the factory
- Processing temperature: set to maximum 82°C at the factory
- Temperature: + 2 to + 50°C + 2 to + 50°C
- Humidity: maximum 90% maximum 90%
JELLY SPRAYER ROYAL
The implement Jelly royal:
- with a special flow-heater.
- with energy saving technique -due to a good heat
- insulation the heat is retained for hours in case of
- work interruptions.
- with heated agent-hose up to the spray gun.
- with spray gun with heat reflecting casing.
- with temperature control controlled heat
- adjustment.
- with pneumatically driven, diaphragm controlled
- agent-feed-pump.
- with low-maintenance technique.
- with transport rollers.
- in stainless special steel execution.
- in HACCP-conformity execution.
- energy saving.
Technical data
- Power Supply: 400 V
- Frequency: 50 Hz
- Fuse in the feed line: 16 A
- Length of power supply cable: 4 m
- Heating capacity: 7000 watt
- Maximum permissible operating
- pressure (PS): 6 bar
- Minimum / maximum permissible
- operating temperature (TS): +2°C to +50°C
- Maximum humidity: 90%
- External compressed air: Compressed air output 90 litres / min – 6 bar
- Compressed air connection: Nominal width (NW) 7.2
- Pressure relief valve: Set to maximum 6 bar at the factory
- Length of the agent-hose: 2.5 m
- Measurements:
- Length:700 mm
- Width:535 mm
- Height:1045 mm
- Weight: 118 kg
- Spraying pressure: set to maximum 2,8 bar at the factory
- Processing temperature: setting between 25 and 93°C
- Temperature: + 2 to + 50°C + 2 to + 50°C
- Humidity: maximum 90% maximum 90%
JELLY SPRAYER POWER PACK
The implement Jelly power pack:
- with a special flow-heater.
- with energy saving technique -due to a good heat
- insulation the heat is retained for hours in case of
- work interruptions.
- with heated agent-hose up to the spray gun.
- with spray gun with heat reflecting casing.
- with temperature control controlled heat
- adjustment.
- with pneumatically driven, diaphragm controlled
- agent-feed-pump.
- with low-maintenance technique.
- with transport rollers.
- in stainless special steel execution.
- in HACCP-conformity execution.
- energy saving.
Technical data
- Power Supply: 400 V
- Frequency: 50 Hz
- Fuse in the feed line: 16 A
- Length of power supply cable: 4 m
- Heating capacity: 10,000 watt
- Maximum permissible operating
- pressure (PS): 6 bar
- Minimum / maximum permissible
- operating temperature (TS): +2°C to +50°C
- Maximum humidity: 90%
- External compressed air: Compressed air output 90 litres / min – 6 bar
- Compressed air connection: Nominal width (NW) 7.2
- Pressure relief valve: Set to maximum 6 bar at the factory
- Length of the agent-hose: 2.5 m
- Measurements:
- Length:700 mm
- Width:535 mm
- Height:1045 mm
- Weight: 132 kg
- Spraying pressure: step less setting between 0 and 4 bar
- Processing temperature: setting between 25 and 93°C
- Temperature: + 2 to + 50°C + 2 to + 50°C
- Humidity: maximum 90% maximum 90%
Related products
CHOCOLATE DOWSING MACHINE
PASTRY DRESSING MACHINES
